Site seeing – the oil soaked track edition – April 15

Mike Cougill over at OST Publications is an inspiration when it comes to modelling track. His work is in O scale sure, his techniques however can be used in any scale to spruce up, or in this case make a mess of, otherwise perfectly good track.

His recent post about modelling oil soaked track is a point in case. Simple, presented in a straightforward style and always willing to experiment Mike’s technique provides a great result.

Image courtesy of Mike Cougill

Mike’s site is full of great articles and ideas. Very well worth the time taken to visit.

Site Seeing – the I’ve got a model room edition – April 1

I’ve been without a modelling space, a dedicated out of the line of fire, not on the kitchen table, leave all your stuff out, style space since the late 80s. A recent move has seen us in a larger space with two spare rooms and a space for our library.

Over my 2 week break from work I’ve gone through my boxes, trying to find all of my collected modelling tools, and I have for the most part succeeded. I’m still missing some critical stuff like my Chopper 2 and Duplicutter along with my set of beading tools that I use to cut a range of river heads. There in a box somewhere but for the life of me I cannot find the blessed thing. Same goes for the NWSL products. I know they’re there, I just cannot say quite where that is for now.

I’ve emptied my mobile toolkits (large and small fishing tackle boxes, and carry totes) to get all of my tools and bits out of the dark and onto the table – making the space look like a the remains of a tornado. So no photos yet – I do have some pride. However, in the short space of time I’ve managed to part complete three little rebuilds from Athearn BB kits, which is more modelling that I have been able to complete in quite a while.

There is a bit of work to get the room into shape. I have a list of honey-dos among them is to build bookcases for our library room. I will add to that list as I need some in my modelling room. These will serve their obvious purpose as well as a base for the switching layout that will be permanently setup in there. More on that in a couple of weeks when I find a tape measure to measure up the room and begin to design something that fits inside the house, and not in the soon to be very cold garage.

I managed to pick up a glass top work desk for $35 Aussie from a local thrift shop (similar to the image on the left). A couple of twists to tighten screws and the judicious use of my allen keys to tighten everything up and the thing is as good as new. The glass top will aid in making scratchbuilt items too.

It has been fun working with my Waldron punch sets and the Historex Hex punch sets and I have to restock all of my depleted punched out bolt heads, and circle plates (great for diesel detailing) from the different grades of styrene.

I’ll post some photos over the next week or two as I get things sorted out. All the best.

 

 

Site Seeing – the Model RR to Go edition

Good day readers wherever you may be, and whatever you may be doing. It has been a while since my last post. That’s mainly down to my work schedule being all-consuming, and the days being long and the start times being all over the clock face. Nine months into my new role as a tram driver I’ve just managed a couple of weeks off and needed every moment to recover.

While recovering and looking around for some layout baseboard design ideas today I stumbled across Rick De Candido’s Fillmore Avenue Roundhouse blog.

His section of layout concepts (click this link to open a new window) has several great ideas. He really thinks outside the box on many of his designs. There is such creativity from this space starved modeller.


POST UPDATE – August 8, 2019
It appears that Rick’s WP site has been removed. I’m trying to contact him through multiple sites to see if there is a new site for this layout. I’ll do my best to keep this post updated.

His terminal layout is something to see too, and can utilise up to 6 operators on the layout during each 2.5 hour operating session. Well worth the time to visit the site and take a long read through the many useful posts there. Thanks to Rick for sharing his passion.

Rick’s Fillmore Avenue Roundhouse layout

Unfortunately I have no contact details for Rick, and there is nothing on the site where I can post a comment to let him know that I’ve profiled his site. If any of you can help with getting me in touch with Rick would you please reply to this post?