Category Archives: Large

Large layout designs

Site seeing – The ‘Barmouth Junction’ edition

This video came to my notice thanks to a post on the Australian Model Railway Magazine’s (AMRM) Facebook account. And while not Australian in any way shape or form, Geoff Taylor’s Barmouth Junction layout is a visually stunning model.


Barmouth Junction

Well worth the time to travel over the line and listen to it’s creator tell you about the layout. It’s a masterpiece and while not a small layout it is so well modelled and I imagine it is just as good to operate on that I wanted  to share it with you.

Well done Geoff and the thanks also to British Railway Modelling (BRM) magazine for showing us the layout.

Site seeing – Loco dead line edition – August 20

Locomotive dead lines make fascinating modelling subjects. One layout idea that has percolated along for the last couple of years relates to a locomotive rebuilder. A recent post by one of my favourite modellers, Mike Confalone, over on the Model Railroad Hobbyist forums, provides a great starting point.


Modelling a deadline

One layout idea that’s been percolating along for the last couple of years relates to a locomotive rebuilder. One aspect of that design is the deadline, that is, the line of locomotives waiting for work to begin on their rebirth, parts removal for donation to other units, and for some the final indignity – the cutters torch and a change of state to scrap metal. Fortuitously, a small project by Mike Confalone over on the Model Railroad Hobbyist forums has been focused on a deadline too.  Mike writes in the post that:

On the proto-freelanced Allagash, we have a caboose track at Madrid. With the move to 1984 a few years back, the caboose track is used less and less as cabooses begin to become less common. We still run them on most of the road jobs, but most of the locals go without, per the prototype in that era. So, I’ve converted the caboose track to a diesel deadline. Its a bit tight but it’s the only available real estate in the yard and I didn’t want to put them on a remote siding. I wanted the deadline near the engine house. Seemed to make sense.

Click the photo above to go straight to the MRH forum post

There’s five pages of comments and information there as of my writing this post. Being a fan of Mike’s work I may be biased. However, I find his work to be of the highest quality and well worth the time to review. I hope that you feel the same way after you’ve read through the thread.


Resources

  • There is a Megastructures documentary (Mega Breakdown – train overhaul) that is worth watching for an overview if you haven’t seen this type of operation before:

 

 

 

 

 

 

Site Seeing – January 1 – The new Everard Junction version

Everard Junction was a great finished model railway filling the loft of Richard Warren’s home in the UK (his YouTube channel can be watched here). However, he was unhappy with several key elements to the underlying baseboard design and issues with the loft space itself  that were causing running issues due to temperature and moisture. So he took what I consider to be a brave step and decided to start again from scratch.

With the loft area now completely reworked, insulated and ready to go, the work to build the new Everard Junction (Mark II?) is underway. As I write there are four videos in the current build series with more to come. With much detail each shows what ideas and issues Richard is solving as he builds the new layout. Richard’s baseboard design shows the very serious thought he has put into the new build. A couple of his ideas will make it into my next baseboard design, specifically allowing a removable backscene within the body of the baseboard.

Click the videos below to being watching, and if you find them interesting head over to the YouTube channel and like and subscribe. There’ll be more content about the build shortly and Richard is very good at presenting his ideas and showing his working method. Now onto the videos.

Videos

New Layout Build – Baseboards

Layout Update – November 2017

New Layout Build – Backscenes

New Layout Build – Fiddle Yard

There are a heap of videos on his channel that should be watched for their ideas and his modelling is outstanding. Enjoy Richard’s work; I do.

Site Seeing – May 14 (the All American Model Railroad show issue)

Thanks to Neil Cowie, a friend and former fellow member of the Essendon Model Railway club in Glenroy – Melbourne, I got invited down to his new club’s show today.

Site 1: US Model Railroad Club of Australia

The US Model Railroad Club of Australia are all US modellers (obviously) and model a variety of US prototype. You can find the club’s web presence on Facebook. Their show was open today, Saturday 14 May, and will be again tomorrow from 09:30 – 16:00 hours at 27 Talmage Street, Albion, Victoria. For locals it is Melways ref: 26 – F10.

The club has only been going for a relatively short time (a couple of years) but they’ve secured club rooms in an iconic (some might say landmark) building in suburban Melbourne and have made a solid start on a large HO scale club layout.

Based in the former Albion railway sub-station, one of several built around the Melbourne metropolitan railway system in the 1910s which housed large rotary converters to transform the 20,000V AC electric current supplied by the Victorian Railway’s Newport Power Station to 1500V DC to power Melbourne’s electric trains. Luckily that very building now allows them plenty of floor space.

If you get  chance tomorrow drop by and visit with Neil. Tell him that Andrew sent you. He’ll get a kick out of that I’m sure. Below is a work in progress shot of the layout.