I’m always looking for better techniques to model rust weathering. This video comes courtesy of a post I found on the MRH website by YouTuber MarklinofSweden. He shows how to create a realistic corrosion effect very simply. Take a look at the video I’m sure you’ll be impressed.
Modelling realistic rust
Got another technique that works for you? Please share it with me and if you found this post useful please like and comment. I’m really interested in what you’re up to with your weathering journey.
It’s officially Australia Day so I thought I’d share more work done weathering the Southern Boxcar underframe and sides. It’s interesting to see how the added brake gear (see more about that here) has become just another part of the model, and no longer seems to dominate the underframe, just as I had hoped it would.
Southern Boxcar 36188
I’m relatively happy with the work so far. There is work to be done on the patches to tone them down “just” a touch.
Beyond that though the underframe weathering is what I now consider to be just right (considering that it will be hard to see). I had to add a bright white background behind the model for it to show up. Very pleased with how this work has come out. It looks perfectly functional, and most importantly, looks the business.
I’ve weighted the model appropriate to my needs (that’s roughly the cube root of the on rail weight). This is heavy by the ‘normal’ standards, but with the Kadee sprung and equalised trucks under them my cars run like dream.
Rust spots need adding on the side, especially on the sliding door (right) side of the car as this area takes a real beating in service. There’ll be less on the left side. I’ll be using Ken Patterson’s oil weathering process, as outlined in the video in the resources section below. I’ve not used this particular method before so it will be interesting to see how it works for me. I’ve weathered in oils before and enjoy them very much, this will be one new technique for quick and dirty rust weathering.
The roof needs to be attached to the car and I’ll be weathering it to match the side weathering. I always do the sides before I do the roof because much of the run off ends up on the car sides.
Work has been busy and I’ve not had much time to model, however I did get time yesterday to begin the weathering process on a couple of car underframes that have come through the brake rod upgrade program. Pictures below…
An E&C Shops kit this PS-1 50′ single door boxcar has been in the shops recently for brake rodding updates. With the deeper side sills it provides a good view of what I’m trying to achieve through the upgrade program – adding ‘something‘ between the bottom of the car and rails.
From a lower point of view the rodding detail on this car disappears into the background clutter of hard angles and shadow (image taken in reflected sunlight on my workbench – late afternoon – with nice and flat tones)
Taken at normal railfan height the rodding is there and fools the eye, at least my eye, into believing that this is a super detailed car. Rolling by you’d never guess anything otherwise.
XAF10 class prototype car
Work continues on the XAF prototype car, an Athearn Blue Box kit. I’ve had my concerns throughout the upgrade that things would stick out like a sore thumb. I needn’t have worried. I like what’s emerging.
This is the car with all brake rodding work completed. I was worried that the brake rodding would be too obvious using the 20 thou brass.
After applying the base of the undercar weathering the experiment has borne sweet fruit. This looks much more like I wanted it to look. Same lighting and location showing the hard angles and shadows. Once on its wheels and with further weathering applied the rodding will disappear into the background, yet have that wow factor as it goes past.
Thanks for stopping by. Comments? Questions? Let me know.
Mike Cougill over at OST Publications is an inspiration when it comes to modelling track. His work is in O scale sure, his techniques however can be used in any scale to spruce up, or in this case make a mess of, otherwise perfectly good track.
His recent post about modelling oil soaked track is a point in case. Simple, presented in a straightforward style and always willing to experiment Mike’s technique provides a great result.
Mike’s site is full of great articles and ideas. Very well worth the time taken to visit.
There has been a shortage of posts on Andrew’s Trains during February, due to a couple of factors. First and most importantly my eldest is moving to another city and beginning at University. Mum and I have put in a lot of work to get her ready for the transition during January and so far in February. This has included multiple trips back and forth looking for accommodation, signing of leases, paying rent, bond and the government related tasks that need to be done to get your adult life underway. The second reason in my output has been extreme heat events we’ve suffered in regional Victoria over the last couple of weeks. Most homes in town don’t have air conditioning. Ballarat’s climate (being nearly 1500 feet above sea level with usually low humidity) means that apart from a few days each year we don’t need it. However, when the air temperature gets over 35 degrees Celsius (this week over the 40 degree Celsius mark) there is simply nowhere to hide from the heat. February is Victoria’s hottest month and the most dangerous. Enough of all of that for now – on to the modelling.
Mike Weiss, one of the Wheeling Freight Terminal crew members has a very clever method of creating scrap steel loads for gondolas. His approach takes on industry standards, rather than the usual articles in model railroad magazines about making scrap steel loads. Often these articles don’t provide an easy way to remove the loads without a wire loop or hidden magnet. In this article Mike addresses both issues. There is a lot of great information on the blog beyond this post. Take the time to look around. Very well worth the effort.
In the past I’ve seen a lot of weathering done that I said was too heavy, unrealistic. Something that you’d never see in the wild. Today I reviewed one of Adrian Nicholls photos on his photostream on flickr.
Image courtesy Adrian Nicholls – via flickr
I take it all back. Adrian says on the site: “66 301 catches the late afternoon sunshine at Carlisle Kingmoor TMD after its 21 hour diagram on train 3J11 the North West RHTT circuit, (17.15 to 14.05). The loco has just been fuelled and is waiting while the water jetter generator and rear loco (66 427) are dealt with. It will then do the whole circuit again hence the accumulation of filth on the locomotive as there is little depot down time on this circuit for cleaning. Never a very pleasant time of the year to deal with locos in such a condition as what every you touch is covered in filth off the track and a drivers railway uniform can soon resemble a fitters overalls if you are not careful.”
I guess you really have to model from the prototype. I would never have thought of making a locomotive this filthy. But there you have it.
I’ve completed the remaining weathering of the body of the 40 foot Hi-Cube. There may be one or two more minor tweaks that I’ll make to get that just right look, overall I am very happy with this cars look. As an experiment using multiple techniques that I’ve not used altogether before I’m very happy and will try this next on a HO scale car. Where are we up to?
The second round of body and roof weathering has gone on. Keeping in mind that this car ran mostly in the dryer states and most of that in Texas in my modelling location there is a preponderance of dust and rust and not a lot of rain weathering. I believe that I have another of these cars in my O scale stash and will document the weathering as I go in the next week for all of you.
I am particularly pleased with the internal look of the car. I hand painted the interior since I wanted a little tooth on the interior of the car, adding some Acrylic Painting Medium to the cheapo acrylic paint to thin and help it settle.
Minor touch ups to the door openings remain, to add the dings and rusting, prevalent around boxcar doors. Overall I’m pretty happy with the outcome. There are still the trucks to do, but we’re getting close. More again soon.
I’ve been laid up the last two days due to some (hopefully) simple skin surgery to remove another unusual mole. Being unable to lift or move too much this week gave me some much-needed time to catch up on some modelling that I’ve put off for far too long. Today’s work has been added to the weathering section, and shows Atlas O’s completely incorrect model of the Cotton Belt 40 foot Hi Cube.
A little history
The real SP & SSW cars in SP class B-70-36 are both small in number and used in captive service for high volume – low weight appliance service from major appliance manufacturers to distribution centres. The cars were 40′-6″ long hi-cube box cars; they were all built by Pacific Car & Foundry in 1966 and had 5001 cubic foot capacity, Hydra-Cushion underframes and 10′-6″ Youngstown sliding doors.
Image courtesy T. E. Cobb via railgoat.railfan.net
They came to be nicknamed the “Ugly Ducklings” due their awkward appearance. Built for appliance service and used later in their life for other roles the SP cars in class B-70-36 were numbered as follows:
SP 659100-659111 and had DF-B loaders
The Cotton Belt cars (the highest number) in class B-70-36 were numbered as follows:
SSW 36014-36126 DF, DF-B, Car Pac loaders
The car being weathered, as provided by Atlas, is car number 36000 which was a wooden sheathed car of a completely different class. The car is actually a Pullman-Standard built Hi-Cube boxcar built for the D&RGW in November of 1967 (see image below). Built for Whirlpool appliance service D&RGW’s 67422 (shown below) had Equipco load dividers and was assigned to load on the Erie Lackawanna at Marion, Ohio. 67422 was also equipped with Pullman-Standard’s ‘Damage Free’ Hydroframe and was painted in the Grande’s contemporary ‘Action Road’ livery.
Image courtesy of James Belmont via railpictures.net
Weathering the model
On this model I’ve tried a multi-disciplinary approach. I’ve used just about everything in my weathering tool chest. Oils, Acrylics, RustAll and Weathering Powders. It’s a bit of an experiment in seeing how to integrate all the different techniques I’ve used. You can head on over to the new page now or take a look at a couple of images of the work today.
I’ll be posting more photos tomorrow as I work on finishing this car. Enjoy the full-page.
The nice folks over at Model Railroad Hobbyist have available for download (to MRH Subscribers only) the Guide to acrylic painting … in a post-Floquil world. Written by Joe Fugate, this 42 page PDF (zipped download) provides a means for railway modellers to work beyond the end of the Floquil model railroad paint era.
Designed to get you where you need to go when repainting Floquil railroad colours using paints from the following manufacturers:
Vallejo Model Air / Game Air
Badger MODELflex, and
This guide provides a timely and useful map to help get the right colour for your next model rail painting project. You can find the download location at:
Keep in mind though that you need to be a subscriber. No payment required so if you are not already a subscriber, you really ought to be. Each month the MRH team produce an outstanding free magazine packed with great stories, information, and resources. Plus there are the forums. Yep you guessed it – I’m a fan and have been since day one.