Tag Archives: spray

What I’m up to – the no trains but there is a tool in it tale

The part without trains in it

When my son turned 10 he was desperate to get into the game Warhammer 40,000. Duly noted Dad trundled down to Melbourne and quietly bought him the starter set Dark Vengeance. For a not inconsiderable sum you get some really great models (49 of them actually) all the basic rules and stuff needed to start playing.

I’d begun to get him into modelling at this stage and he’d made a couple of half-decent models. I asked him if he’d like help to get the models built and ready for paint. To his credit he said “I’ll be alright Dad” and promptly trundled off to the modelling table and began to put them together. Then things seemed to stall. I let it ride for a couple of months and then one day got the models out and asked him if he’d like some help to put them together to get this under way so he could start wargaming. Thus the problems came to light. Turns out that he followed the instructions to the letter putting the models together – using the glue supplied in the kit. And here is where the problems came to rest; the glue was woeful. It was not boy wonder’s fault. He’d followed the detail in the instructions to the letter. But the glue seemed to not want to hold and it had crystallised on the plastic. Gripping enough to not want to let go and not enough to hold the pieces together.

Warhammer_ModelsSo over the summer (since November 2015) I’ve been working away of an evening after meals to get these cleaned up and ready for paint for boy wonder. It has taken a little over two months of constant slog to undo the damage done to the models by the damned glue (think of super-glue that’s been hit with accelerator and gone off really quickly). The work to rebuild them included ‘gently’ prizing them apart, cleaning up the ‘glue’ residue, filing, shimming and doing what was needed to set arms and torso, smooth the glue damage and prep them for paint. Overall I am impressed at the quality of the models. And the acrylic black undercoat went on a treat from a car store rattle can.

The part with the tool in it

While trying to figure out the best way to paint these models I took a long hard look at my soldering station third hand. With 49 of these models to paint I needed something that would allow me to spray lots of them as often as possible without them blowing all over the place.

The_DectopusWhat I came up with was the Dektopus (left). It’s like an octopus, but with two extra hands – thus the dek bit. I am a big fan of making the tools you need when you can. And this one came out just like I wanted it to. I bought two metres of cable. Cut enough of the sheathing off to allow for a solid connection when I soldered the cable and the Alligator clips. Cut two pieces of 2×1 for the holders and two shorter ones for the stands. I screwed the long pieces back to back, drilled 10 holes in them at equal spacings, just smaller than the diameter of the cable. I unscrewed the two pieces and then placed the cable in the grooves, applied white glue, clamped it together, and then screwed it back together. Glued and screwed the ends on and left it overnight.

So that has kept me busy the last few months of evenings. Now back to trains.